Product Description
Pump diesel and kerosene with your new fuel transfer pump. Pump other liquids but check the manual first. Avoid pumping petrol or other flammable liquids.
Liquids that can be extracted: diesel, kerosene, edible oil (but not edible grade)
Liquids that cannot be extracted: gasoline, engine oil, gear oil, water, urea, acidic and alkaline liquids, corrosive liquids, chemical liquids, edible liquids, etc.
Product advantages:
Strong sealing, fast oil absorption, easy installation
1. 100% all-copper coil, using high-quality copper wire, 6-wire motor to ensure high efficiency of the motor
2. Each machine undergoes air pressure testing before leaving the factory to ensure the overall sealing of the pump body and avoid oil leakage.
3. Our impeller is made of alloy steel, which is durable and not easy to deform. It has a plum blossom-shaped design and is not easy to get stuck.
4. Metal body: The body adopts spraying process.Complete accessories: thick-walled pipe joints are used, which are not easy to deform.
5. Portable and multifunctional: You can install the pump on oil drums of various sizes or large horizontal fuel tanks for easy refueling, perfect for vehicles and equipment no matter where you are.
Product specifications:
Model: Gas pump set
Speed: 4200r/min
Flow: 45L-50L
Lift: 5-8M
Suction distance: 2-5M
Voltage: 12V/24V/220V
Oil inlet pipe length: 2M
Oil outlet pipe length: 4M
Product net weight: about 8.5KG
Package include
1 x Diesel Transfer Pump
1 x Auto Pump Gun
1 x2m Inlet Hose
1 x4m Outlet Hose
1 x Inlet Filter
1x Hose Fitting
2 x Hose Fixing Clamps
2 x Alligator Clips
1 x Instruction Manual
Precautions
?Not suitable for use with low-ignition point gasoline. Refuel with alcohol, liquefied gas and high-viscosity engine oil.
?Before use, confirm whether the power supply matches the oil pump voltage.
?The DC pump power supply has +- levels, and the red line is the positive pole. Otherwise, the oil pump will reverse and no oil will come out.
?The inlet and outlet oil pipes are as shown by the arrows. The oil inlet pipe and joints must not leak to ensure the suction range.
?Be sure to install a matching filter on the oil inlet pipe to prevent hard impurities from being sucked into the pump cavity and damaging the pump core. The blades must always be clear of dirt on the surface of the filter.
?The oil pump must work continuously and idling without oil for more than 5 minutes to avoid damage due to friction and heat of the pump core and oil seal blades.
?No unauthorized modification is allowed. Disassemble and extend the power cord, etc.
If the power supply uses a battery, make sure the battery has sufficient power.
ATTENTION:
If the customer change their mind and want to cancel the order, please contact us within 2-3 hours after placing the order. Or, once the package is dispatched, we won't be able to intercept packages in transit. Please understand.
